HEATER WITH THERMOSTAT 3000W 6/4" TO THE BOILER (GB01.3064G)
HEATER WITH THERMOSTAT 3000W 6/4" TO THE BOILER (GB01.3064G)
HEATER WITH THERMOSTAT 3000W 6/4" TO THE BOILER (GB01.3064G)
HEATER WITH THERMOSTAT 3000W 6/4" TO THE BOILER (GB01.3064G)
HEATER WITH THERMOSTAT 3000W 6/4" TO THE BOILER (GB01.3064G)
HEATER WITH THERMOSTAT 3000W 6/4" TO THE BOILER (GB01.3064G)
HEATER WITH THERMOSTAT 3000W 6/4" TO THE BOILER (GB01.3064G)
HEATER WITH THERMOSTAT 3000W 6/4" TO THE BOILER (GB01.3064G)
HEATER WITH THERMOSTAT 3000W 6/4" TO THE BOILER (GB01.3064G)
HEATER WITH THERMOSTAT 3000W 6/4" TO THE BOILER (GB01.3064G)
HEATER WITH THERMOSTAT 3000W 6/4" TO THE BOILER (GB01.3064G)
HEATER WITH THERMOSTAT 3000W 6/4" TO THE BOILER (GB01.3064G)

HEATER WITH THERMOSTAT 3000W 6/4" TO THE BOILER (GB01.3064G)

43,37 EUR
incl. VAT /
Lowest price in 30 days before discount: /
Regular price: /
of
14 days for easy returns
Find out in which store you can check the product and buy it right away
HEATER WITH THERMOSTAT 3000W 6/4" TO THE BOILER (GB01.3064G)
HEATER WITH THERMOSTAT 3000W 6/4" TO THE BOILER (GB01.3064G)
Safe shopping

Intended use

Electric heating element with a thermostat for capacitive water heaters is intended to heat water for Domestic Hot Water (DHW) and Central Heating System (CH). It can be installed in any tank (with the exception of those made of stainless steel) which design (structure and dimensions) allows its installation.

Technical characteristics

The device consists of a 3000W heating element, an electronic thermostat that provides precise regulation of the temperature of the water in the tank, and a power cord with a universal plug. The illumination of the indicator LED, indicates the operation of the heater.

Application:
  • DHW storage tanks,
  • Central heating buffer tanks,
  • As additional heating element for radiators and other heating appliances.

High quality device, confirmed by CE certificate.

The heater must be installed in accordance with applicable regulations, standards and manufacturer's recommendations. Any improper and incompatible use is prohibited.

Exploitation not in accordance with the instructions and the performance of repairs by persons not authorized to do so may cause failure and void the warranty.

Placement and Installation

The heating module can be installed in both horizontal and vertical tanks, the design of which takes into account the possibility of installing the heating module and spaces where the temperature is not lower than 0ºC and higher than 50ºC;

The module cannot be installed in tanks made of stainless steel.

Installation Requirements

  • The design of the tank should allow the heating element to be installed in the tank without collision;
  • The heating element must not touch the internal parts of the tank;
  • The diameter of the connection spigot, should be in accordance with the dimensions of the thread of the heating module (it is permissible to use reductions);
  • The depth (length) of the connection spigot (socket), must be shorter than the length of the dead zone of the heating module (50mm);
  • Install in the lower or middle part of the tank in a horizontal or vertical position (heating element upwards) in the place designated by the tank manufacturer;
  • The sensor tube must not come into contact with the heating element (recommended distance of about 10 mm).

Detailed information on installation and use can be found in the user manual.


Podstawowe informacje dotyczące użytkowania i ostrzeżenia

  • The heater should be sealed with tow (recommended) or other available sealing compounds for the installation site;
  • In the case of horizontal installation, the correct position of the heater is when the connection wire comes out of the housing downwards;
  • After installing the heater, fill the tank with water and vent the installation. In order to avoid corrosion of the heater plug, vent the coupler (loosen the heater slightly so that the air comes out of the coupler in which the heater is installed, and then tighten the heater);
  • To extend the life of the heater, it is recommended to install a magnesium anode.
  • Do not switch on without water - the necessary condition for proper and long-term operation of the heater is complete immersion of the heating element in water (make sure that the tank into which the heater is installed is completely filled with water and the entire heating element is immersed in it);
  • It is advisable to check the operation of the device periodically and check the correctness of the operation of the heater and the plug with a protective pin;
  • If the electric heater is not used for a long period of time, disconnect the power supply by removing the plug from the power socket.

Detailed information on installation and use can be found in the user manual.

Before you make a purchase, make sure that the heater you have chosen fits your storage tank. Be sure to check the thread size and select the correct heater wattage.

Zobacz również:

Brand
Symbol
GB01.3064G
Producer code
5901549235319
Series
TECHNICAL DATA
HEATER POWER
3000W
TEMPERATURE RANGE
25°C - 70°C +/- 3°C
THREAD
6/4
VOLTAGE
230V / 50 Hz
CURRENT
13 A
PROTECTION DEGREE
IP24
CABLE LENGTH
1,5 m/ 3 x 1,50
WEIGHT
680 (g)
PROTECTION CLASS
KL. I
LENGTH (± 10mm)
440 (mm)
LENGTH OF THE HEATING ELEMENT L (± 10mm)
370 (mm)
TYPE
RT 150.5/4
WORK ENVIRONMENT
WATER
MATERIAL CHARACTERISTICS
CASE
PP
FILL MATERIAL
STEEL
HEATING ELEMENT COVER TUBE
COPPER
Do you need help? Do you have any questions?Ask a question and we'll respond promptly, publishing the most interesting questions and answers for others.
Ask a question
If this description is not sufficient, please send us a question to this product. We will reply as soon as possible. Data is processed in accordance with the privacy policy. By submitting data, you accept privacy policy provisions.
Sprzedawcy na okres 24 miesięcy.
Sprzedawcy na okres 24 miesięcy.
Write your opinion
Your opinion:
5/5
Add your own product photo:
pixelpixel